1 test/Rapid Antigen Test Kit (Sandwich Saliva version)

10 test/Saliva Antigen Test (Colloidal Gold） Feature Saliva available Ensure sample integrity Quick result within 15 mins High efficiency sensitivity No instrument needed suitable fot mass screening Based on immunoassay more practical than PCR test Test Procedure After collection,remove and dispose the upper triangle part of the saliva collector. Then tear the seal of the lysis buffer tube. Press gasbag A of the pipette and dip it into saliva sample. Release gasbag A until the sample filled the whole tube.  Then press gasbag A to transfer the sample into the pre-opened lysis buffer. Cover the sampling tube with the dropper and squeeze the tube from the outer wall 5 times to completely dissolve the sample in the buffer. Open the aluminum foil pouch, take out the test cassette and lay it on a dean flat surface,add 4 drops(approximately 100μ） processed sample extract into the sample well. The results should be observed within 15-20 minutes. Result observed after 20 minutes is invalid. 1、Kit Contents for Saliva Secretion test 2、Spit at least 1 mL of saliva sample into the saliva collector 3、Remove and dispose the upper triangle part of the saliva collector.Then tear the seal of the lysis  buffe tube. 4、Transfer the saliva sample into the lysis buffer sapling tube with the pipette 5、Cover the tube with the dropper 6、Squeeze the swab from the outer tube wall 5 times 7、Add 4 drops processed sample extract into the sample well 8、Observe the results within 15-20 minutes Interpretation of assay result Positive：Two lines appear. One colored line should be in the control line region (C),  a colored line appears in test line (T) region. it indicates that antigen is detected.Samples with positive results should be confirmed with alternative testing method(s) and clinical findings before a diagnosis is made. Negative：Only one colored control line appear, it indicates that no antigen is detected, and the result is negative. Invalid：Control line fails to appear,the test result is invalid regardless of whether there is a burgundy test line, and it should be tested again.

New coronavirus Antigen test is used for the qualitative detection of novel coronavirus (COVD-19) antigen in human throat swab and nasal swab samples.

New coronavirus Antigen test is used for the qualitative detection of novel coronavirus (COVD-19) antigen in human throat swab and nasal swab samples.

New coronavirus Antigen test is used for the qualitative detection of novel coronavirus (COVD-19) antigen in human saliva samples.

5test/Saliva Antigen Test (Colloidal Gold Feature Saliva available Ensure sample integrity Quick result within 15 mins High efficiency sensitivity No instrument needed suitable fot mass screening Based on immunoassay more practical than PCR test Test Procedure After collection,remove and dispose the upper triangle part of the saliva collector. Then tear the seal of the lysis buffer tube. Press gasbag A of the pipette and dip it into saliva sample. Release gasbag A until the sample filled the whole tube.  Then press gasbag A to transfer the sample into the pre-opened lysis buffer. Cover the sampling tube with the dropper and squeeze the tube from the outer wall 5 times to completely dissolve the sample in the buffer. Open the aluminum foil pouch, take out the test cassette and lay it on a dean flat surface,add 4 drops(approximately 100μ） processed sample extract into the sample well. The results should be observed within 15-20 minutes. Result observed after 20 minutes is invalid. 1、Kit Contents for Saliva Secretion test 2、Spit at least 1 mL of saliva sample into the saliva collector 3、Remove and dispose the upper triangle part of the saliva collector.Then tear the seal of the lysis  buffe tube. 4、Transfer the saliva sample into the lysis buffer sapling tube with the pipette 5、Cover the tube with the dropper 6、Squeeze the swab from the outer tube wall 5 times 7、Add 4 drops processed sample extract into the sample well 8、Observe the results within 15-20 minutes Interpretation of assay result Positive：Two lines appear. One colored line should be in the control line region (C),  a colored line appears in test line (T) region. it indicates that antigen is detected.Samples with positive results should be confirmed with alternative testing method(s) and clinical findings before a diagnosis is made. Negative：Only one colored control line appear, it indicates that no antigen is detected, and the result is negative. Invalid：Control line fails to appear,the test result is invalid regardless of whether there is a burgundy test line, and it should be tested again.

• No conventional nucleic acid extraction process is required. • Reagent component integration, simple and quick operation. • The test can be done with just a small liter of blood sample. • High specificity and sensitivity.

New coronavirus Antigen test is used for the qualitative detection of novel coronavirus (COVD-19) antigen in human saliva samples.

COVID-19 qPCR Nucleic acid detection kit

• No conventional nucleic acid extraction process is required. • Reagent component integration, simple and quick operation. • The test can be done with just a small liter of blood sample. • High specificity and sensitivity.

Respiratory Syncytial Virus (RSV) Antigen Testing Kit is used for the qualitative detection of Respiratory Syncytial virus (HRSV)antigen in human oropharyngeal swabs or nasopharyngeal swabs in vitro.

• No conventional nucleic acid extraction process is required. • Reagent component integration, simple and quick operation. • The test can be done with just a small liter of blood sample. • High specificity and sensitivity.